New item! ships in early July
FREE shipping within CONUS
NEW VERSION with detachable cable
The MK2 models have adopted the cable-exchangeable structure as well as the case holder made from aluminum aiming at user-friendliness and wearing comfort when listening to music.
The first SR-Lambda series was introduced 36 years ago and it has further developed into a new-generation SR-Lambda with its newly designed enclosure - the new SR-L700MK2 advanced-Lambda series Earspeaker.
Exchangeable cable structure
The exchangeable cable structure of recent trend for high-quality headphone has been employed. This enables the prospective correspondence to a high-definition cable, and the easy maintenance to sudden disconnection, thus improving the user-friendliness of earspeaker.
The same 6-strand parallel wide low-capacity cable of 6N(99.9999%) OFC and silver-plated annealed copper wire as in the SR-009S top model is attached to the SR-L700MK2. The cable realizes the assured signal transmission that does not lose the freshness of sound.
Case holder made from aluminum
The change of material has enabled the mechanism design with more high flexibility. In the MK2 models, changing the case holder design from conventional linear style into moderate curve form produces the effect that ear pads fit more naturally on both-sides-of-the-head part. Moreover, the curve form gives high rigidity and prevents from generating unnecessary distortion or twist at the time of wearing, resulting in the great improvement of fit feeling. In an open-air type earspeaker, the degree rise of adhesion at the time of wearing greatly contributes to the improvement of low-frequency reproduction.
TOP QUALITY SOUND ELEMENT
The SR-009 hand selected thin-film diaphragm as well as fixed electrodes machined through three-layer stainless etching using heat diffusion has been employed for the SR-L700MK2 sound element. Thus, rich deep bass response, delicate high frequency and soothing mid-range has been achieved in a balanced sound.
10-CLICK TYPE HEADBAND ASSEMBLY
The headband (ARC) assembly of the SR-L700MK2 is equipped with 10-click slider mechanism for head pad height adjustment adopted from SR-009. Once adjusted, the slider always maintains its optimal position to make readjustment unnecessary. This enables you to enjoy hours of pleasant music listening with utmost comfort.
NEW LOW CAPACITANCE HiFC WIDE CABLE
High performance pure copper HiFC™ developed by Hitachi employs the core wires. HiFC has various advantages, including similar sonic characteristics as used in SR-009 and SR-L700MK2 6N high purity 99.99999% copper wires. The entire cable are then arranged in a flat, wide format configuration to lower the capacitance between each wires and finished with the most suitable structure to drive the earspeaker.
NEW GENUINE LAMB LEATHER EARPADS
New earpad design is carefully hand crafted with genuine lamb leather for utmost comfort for hours of music enjoyment as well as sound performance.
Type: Push-Pull Open Back Oval Electrostatic Earspeaker Headphone
Frequency Response: 7 - 41,000Hz
Electrostatic Capacitance: 110pF (including cable)
Impedance: 145k Ω (including cable, at 10kHz)
Sound Pressure Sensitivity: 101dB / 100V r.m.s. 1 kHz
Maximum Sound Pressure: 118dB / 400Hz
Bias Voltage: 580V DC
Left & Right Identification: "L" and "R" indicated on the arc assembly Left channel cable is marked with a solid line. Right channel is marked with a dotted line.
Ear Pads: Genuine Lamb Leather (direct skin contact), high-quality synthetic leather (surrounding portion)
Cable: 6N (99.9999%) annealed OFC with silver coating, Parallel 6-strand, 2.5m full length, low-capacity special wide cable
Weight: 508g (including attached cable), 371g (without cable)
Made in Japan
Woo Audio is an authorized reseller
STAX SR-L700MK2 headphone x 1